bl双性厨房裸体围裙_一本大道一卡二卡三卡_2019年中文字字幕在线看不卡_中文字幕日产乱码天堂

Subdivide

Change the value of Number of Cuts in the lower left corner.Since you are editing the shape of the plane, it is best not to be too detailed.

(資料圖片)

Subdivide

Then, select only the vertex at the neck, and press [G]→[Z] to lower the point.

Click on a vertex to select it.

Move it down and press Enter to confirm.

After selecting the vertex that will be the shoulder part, use the [E] key (extrude) -> [Z] key (Z-axis) to extend it.

Select the vertex that will be the shoulder part

Press [E]→[Z] key to push it out to the Z axis.

Create the fabric under the armpit.After selecting the armpit vertices as shown in the screenshot below, press the E key (extrude), S key (expand), and X key (to X axis).When the width of the body has been expanded by moving the cursor, press the Enter key to confirm.

Select the vertex under the armpit.

Move the cursor to widen the width, and press the Enter key to confirm.

Let’s make a smooth curve around the collar and armpits.

Add a modifier from the modifier properties (tool icon) on the right side of the screen.After selecting the Subdivision Surface, open the Advanced tab and change the Boundary Smoooth to Keep Corners.

Subdivision Surface

Switch to object mode by pressing the [Tab] key (or the top left button).Select Apply from the v next to the Subdivision Surface to apply it.

Switch to object mode and apply the Subdivision Surface

Switch to Edit mode again with the [Tab] key, make sure the Subdivision Surface is applied, then select all with the [A] key and push it out with the [E] key.Then move the cursor to the back of the human model, adjusting its position, and place it between the human models.

The duplicate is the back of the body.

Press [E] key to push it out, adjust it with the cursor, and press Enter to confirm.

After that, select the meshes where the neck, arms, and torso will be.You can select each mesh of the model by clicking on Select Face in the upper left corner of the screen.

Face selection mode

Select the area where the neck and arms will appear.

Don’t forget the bottom.

Delete them with the [X] key.Select Faces and delete only the faces.

Delete with [X] key

Then select the remaining Faces (i.e., the part of the shoulder and armpit that will be sewn together).Click the [X] key (Delete) -> Only Faces to delete the faces only.

Select Only Faces

Press [Tab] key to change to Object mode.

With the humanoid model selected, click Collision from the right side menu.

Select Collision from Physics Property

Next, select the clothing model and click on Cloth from the Physics Property menu as well.

Select Cloth from Physics Property

At the bottom of the Cloth menu, you will see a Shape item, and check Sewing.

Check Sewing.

Click the Play button at the bottom of the screen to start the simulation.

Click on the triangular play button.

In some cases, the cloths are not sewn together and nothing happens after playback.If the problem is caused by duplicate vertices, it is easy to solve, so try the following method.

First, switch to edit mode by pressing the [Tab] key, and then press the [Alt] key + [H] key to make sure there are no hidden ones.

Alt key + H key

Then, select all with the [A] key.

Select all with the [A] key

Press [M] key to Merge and select By Distance.

By Distance

The 56 extra vertices have been removed.

Switch to Object mode with the [Tab] key and click the Play button again, and this time the simulation will be performed correctly.

The simulation is now running.

To fix the angle of the shoulders and the width of the body, stop playback and go back to frame 1, and then edit the shape of the plane.

Select the edges and the back of the body and press X → Delete Edges.

In addition to clothes, you can easily create fabric products.

First, add a new Plane by pressing [Shift+A].

Add a new Plane

Switch to edit mode with the [Tab] key, then right-click and select Subdivide.

Subdividing a Plane with Subdivide

From the menu at the bottom left of the screen, set the Number of Cuts value to 10.This is because 10 is the maximum number of values that can be processed simultaneously.

Set the Number of Cuts value to 10.

Then, click anywhere on the 3DView screen to confirm, and then press [A] to select all, and right-click to select Subdivide to further subdivide.

The finer the subdivision, the better the simulation will look, but be aware that it may take a long time to process and may force Blender to close itself.

Change the value again

Then press the [E] key to push it out.A line will appear on the Z axis (i.e., the line will be pushed in the direction of the Z axis), so move the cursor and press the Enter key to confirm.

Press the [E] key to push out and press the Enter key to confirm.

After changing the angle of the screen so that the sides are visible, hold down the [Alt] key and click.

Make sure you can select the side or face from the top icon.

Select while holding down the [Alt] key

Then select [X] key -> Only Faces and delete it.

[X] key -> Only Faces

Press [Tab] key to switch to object mode.Select “Cloth” from the physical properties on the right side.

Select cloth from the physical properties while in object mode with the [Tab] key.

Then set the settings as shown below.

Check the Pressure checkbox and change the value to 3.

Pressure is a necessary setting when simulating objects filled with air, such as balloons, and the larger the value, the greater the air pressure.

Check the Sewing checkbox under Shape.

Sewing is applied when sewing two pieces of cloth together.

Check the Self Collisions checkbox.

If there is a non-fabric model, collisions will be applied to it, but if there is only a fabric model, as in this case, Self Collisions can be applied to prevent the model itself from being penetrated.

Set Gravity to 0

Gravity is the force of gravity.If you set this to 0 to make the model weightless, there is no need to worry about it falling or flying away.

When you have completed all the settings, click the Play button.

Playback will simulate the model.

When you are done, stop playback and apply cloth simulation.

With the keyframe of the desired shape selected, click on the “v mark” from the modifier property Cloth and select Apply.You can make the keyframe keep its shape even if you move it.

Select Apply from v and apply.

only for learning exchange

標(biāo)簽： EXTRUDE ARMS shift DELETE